DC88-24V || 13220305 – DC CONTACTOR, MAKE ALBRIGHT, MODEL DC 88, 24V

• Type – Dc 88
• Coil Voltage – 24V
• Thermal Current Rating – Interupted – 100A
• Thermal Current Rating – Unlnterupted – 100A
• Main Terminal – Male/Female Stud
• Main Configuration – Motor Reversing

The DC88-1000P motor reversing type of contactors
has been designed for direct current loads, particularly
motors as used on electric vehicles such as industrial
trucks. The DC88-1000P Type is a monoblock
construction, resulting in a neat compact design which
is compatible with modern electronic control systems.
Developed for both interrupted and uninterrupted loads,
the DC88-1000P Type is suitable for switching
Resistive, Capacitive and Inductive loads. The
DC88-1000P Type is sealed to IP67 thus offering
greater protection against adverse environments such
as water or dust, and allowing for water immersion up
to 1 metre.

The main contact circuit, designed for motor reversing,
has a built in failsafe, so that if both coils are energised
simultaneously the contact arrangement is open
circuit. The DC88-1000P Type has double breaking
main contacts with silver alloy contact tips, which are
weld resistant, hard wearing and have exent
conductivity. The DC88-1000P Type M8 main stud
terminals can be configured in a variety of ways in
order to suit the application. Coil connections are by
means of 6.3mm spades and mounting is via the
moulded bracket and can be horizontal or vertical,
when vertical the M8 contact studs should point
upwards. If the requirement is for downwards
orientation we can adjust the contactor to compensate
for this.