INDUSTRIAL CLEANING
Scrubber Dryers
Floor Cleaning for Industrial & Commercial Facilities
NGT Scrubber Dryers combine floor scrubbing and dirty-water recovery in a single cleaning process, helping maintain cleaner industrial and commercial floors with less manual effort.
The range is available in Walk Behind and Ride-on configurations, allowing equipment selection to begin with the size of the cleaning area, available operating space and cleaning requirement.
Choose the Right Scrubber Dryer for Your Facility
Different facilities require different cleaning approaches.
A compact Walk Behind machine may be better suited to narrower aisles, smaller cleaning zones and areas with frequent obstacles, while a Ride-on Scrubber Dryer may be more appropriate where larger floor areas and longer cleaning cycles need to be covered.
The right starting point depends on floor area, cleaning frequency, access width, maneuverability and the operating environment.
SCRUBBER DRYER RANGE
Two Configurations for Different Cleaning Environments
Start with the size and layout of the cleaning area, then consider maneuverability, cleaning frequency and the way the operator needs to move through the facility.
Walk Behind Scrubber Dryer
Compact Cleaning for Smaller and More Confined Areas
Walk Behind Scrubber Dryers are operated by an individual walking behind the machine, making them suitable for areas where maneuverability, compact dimensions and precise cleaning around obstacles are important.
They are a practical starting point for smaller to medium-sized floor areas, aisles and spaces where a larger ride-on machine may not be suitable.
Ride-on Scrubber Dryer
Higher-Productivity Cleaning for Larger Floor Areas
Ride-on Scrubber Dryers allow the operator to sit on and drive the machine while cleaning, making them better suited to larger floor areas and applications involving longer cleaning cycles.
The ride-on configuration can be considered where cleaning productivity, operator movement and coverage of larger open areas are key requirements.
Walk Behind vs Ride-on Scrubber Dryer
Both configurations perform mechanised floor scrubbing and dirty-water recovery, but they are suited to different operating environments.
| Selection Factor | Walk Behind Scrubber Dryer | Ride-on Scrubber Dryer |
|---|---|---|
| Machine Operation | Operator walks behind machine | Operator rides on machine |
| Best Starting Point | Small to medium cleaning areas | Medium to large cleaning areas |
| Maneuverability | Better suited to tighter spaces | Better suited to larger open areas |
| Aisles / Access | Narrower operating spaces | Wider operating spaces |
| Cleaning Cycles | Routine / shorter cleaning runs | Longer or frequent cleaning runs |
| Operator Position | Walking | Seated |
| Selection Priority | Compactness & maneuverability | Productivity & area coverage |
Complete Floor cleaning in 4 steps
01
Apply Cleaning Solution
Water and cleaning solution are delivered to the floor-cleaning area.
02
Scrub the Floor
Rotating cleaning brushes or pads act on the floor surface to loosen dirt and contamination.
03
Recover Dirty Water
The recovery system collects dirty water from the floor into a separate tank.
04
Complete the Cleaning Pass
Scrubbing and water recovery happen as the machine travels through the cleaning area.
Applications
Warehouses
Routine cleaning of warehouse aisles, staging areas and operational floors.
Commercial Facilities
Regular floor-cleaning requirements across larger managed facilities.
Workshops & Service Areas
Cleaning dirt and residues from operational and maintenance floor areas.
Industrial Facilities
Mechanised floor cleaning across a variety of industrial environments.
Manufacturing Facilities
Floor cleaning across production, assembly and material-movement areas.
Distribution Centres
Cleaning large operational floors, receiving areas and dispatch zones.
What Should Be Confirmed Before Selection?
The right scrubber dryer should be selected around the actual cleaning requirement rather than machine size alone.